There’s nothing like riding a motorcycle on the open road. For most of the world, the motorcycle or 2-wheel scooter is the most common form of motorized transportation available. Around 200 million motorcycles are in use worldwide (compared to almost 600 million cars) and almost 60% of these are in Asia and the Far East – China and India both have over 35 million motorcycles and motorized scooters in use. Contrast this to the United States where the car is dominant (about 30% of the world’s cars are here in the United States). In fact, the world’s largest producer of two-wheel vehicles isn’t Harley Davidson or Suzuki, it’s Hero Motocorp, based in India. Kind of small indication of how the world is changing, isn’t it?
While we’re not experts on the place of motorcycles in the culture of these other countries, it’s obvious that here in the USA, the motorcycle has a unique niche in our pop culture consciousness. This place was cemented in the 1960s with movies like Easy Rider and Hunter S. Thompson’s book on the Hells Angels motorcycle gang in the mid-1960s. Harley Davidson’s sales are bolstered by their unique marketing appeal to how motorcycles look and feel on the open road. Harley even patented the exact sound of their engine. Beyond Harley Davidson, motorcycle sales in the United States today are around 1 million units a year. So lots of people these days are hitting the open road and feeling the wind in their face.
While motorcycles and scooters are fuel-efficient and a lot of fun to ride, they aren’t necessarily cheap. High-end motorcycles like a Harley can easily rival what it costs for a new car. That’s a lot of money invested in two wheels. So if you have a motorcycle or scooter, it’s important to take care of your investment so it will keep you riding for years to come.
This article covers advice and tips from professionals to guide you in the steps you need to follow to take care of your bike and keep it working its best for as long as possible. We will talk about areas of the bike that you need to pay regular attention to and why. We’ll talk about the right fuels to use and how to store your bike.
YOUR OWNER’S MANUAL – THE ESSENTIAL GUIDE TO SUCCESS
Following the owner’s manual is, quite frankly, pretty underrated when it comes to ensuring a long and successful ownership experience of your motorcycle (and your car, too). But they write owner’s manuals for a reason. The manual will give you the best advice from the manufacturer on important issues like
- What you need to get fixed, how often, and when you should schedule the service
- The type of oil and essential fluids needed by your bike
- Any special procedures you can undertake yourself to keep your bike running its best
For those of us who are heavy into DIY and more mechanically-inclined, there are “full service” manuals available that basically tells a mechanic everything they need to know to rebuild the entire bike from scratch, down to such esoteric information as how many pounds of force to tighten a bolt on the bike.
Whether you’re one of those gearheads or just an average biker who wants to keep your bike in its best shape, you need a copy of your owner’s manual and you should check it often. The investment will be worth it.
PROPER MAINTENANCE SCHEDULES
Manufacturers recommend that motorcycles be serviced at specific mileage or time intervals. The suggested maintenance intervals are listed in the owner’s manual to help owners and technicians set up a realistic and appropriate maintenance schedule. Most motorcycles made after 1980 are pretty reliable if maintained properly. To some extent, the high reliability of today’s motorcycles has worked to the disadvantage of many riders. Some riders have been lulled into believing that motorcycles are like modern cars and require little maintenance. Modern bikes require less maintenance than they did in the 60’s and 70’s but they still need a lot more maintenance than a car.
BREAKING YOUR MOTORCYCLE IN FROM NEW
When you lay out the money to buy a new cycle, you certainly want it to start its life out right. This means you have to “break it in” correctly. This will prevent problems with your bike later on. Exactly what you need to do in this respect depends on the manufacturer recommendations for your bike, which will be found in your manual. It could be as light as just being advised to do “light riding” for the first hundred miles of life, to more complex and involved break-in protocols that involve driving the bike at specific speeds and engine RPMs for specific amounts of time, and which may change and morph from doing one thing during the first few hundred miles to doing something else for the next thousand.
Whatever your owner’s manual says for this is what you need to do. And you do need to do it. It will save you headaches down the road. You have enough headaches in your life without having one from not following these guidelines.
THE ESSENTIAL OIL CHANGE STEP
You should be well familiar with the concept that changing your oil within the recommended guidelines is the single best thing you can do for any engine on any kind of vehicle. This obviously includes motorcycles.
It’s just as important to change your motorcycle oil on a regular basis because those engines tend to work harder – at higher speeds and RPMs – than cars and truck engines. Your owner’s manual will have the best recommendation for the right oil to use. It will also tell you how often you need to change it. Ignore these recommendations at your peril.
Go too long between changes and your oil won’t protect the metal parts from wear as effectively as it should. Remember that oil contains additives such as acid neutralizers which are used to protect the engine surfaces from build-up of damaging contaminants and combustion products (like soot and acid). So if you go too long between changing your oil, these additives will wear out and stop protecting the engine.
On the flip side, change your oil too often and you’ll be flushing money down the drain. Sure, you could change your oil every 500 miles “just to be safe”, but what would be the point? You’d just be wasting money by being too overly cautious.
AIR FILTER MAINTENANCE
An internal combustion engine requires a constant intake flow of air to provide the oxygen needed to support combustion of the fuel. A clean air filter is important for making sure that the air that goes into your engine doesn’t bring in foreign contaminants and substances that may do harm to your engine. Dust and dirt and particles from the environment can get trapped in the oil film or onto metal surfaces where they act as abrasives and damage the valves, cylinder and internal bearings.
Cleaning or changing the air filter will help prevent this. How often you should do so is dictated by your owner’s manual (there it is again). It’s also always a good idea to increase the frequency with which you change the filter if you ride your motorcycle a lot in dusty environments. Obviously a dusty environment increases the speed at which your filter gets dirty and excessively plugged.
Lastly, a clean air filter will also help your gas mileage. This is a bonus that everyone likes. Now it won’t boost your mileage by 20% or anything like that, but you do typically get a small mileage bonus for being conscientious in your maintenance in this area.
RIDE UNDER PRESSURE
Tire pressure can be the difference between wasting gas and money or riding at your best. Tires are the contact points for the road and influence so many things about your riding experience. Your fuel mileage stays high and your bike handling is best when your tires are at the proper pressure. Tire pressure that is too low causes too much of the tire’s surface to contact the road at any given time. This creates excessive drag and drops your gas mileage. It also places pressure on the side walls of the tires and speeds the wear of the tire. So make sure you’re not riding too low. But don’t raise the tire pressure too high, either. It is true that higher tire pressure gives you a mileage boost. But go too far in this direction (some people think if a little of something is good, a lot of it has to be great) and you won’t get the best traction in wet weather, which is obviously dangerous. And tires that are overinflated wear more quickly too, but in the middle of the tread, instead of on the sides.
There’s no rocket science here – just check your tire pressure once a week with a gauge.
KEEP YOUR BEARINGS (GREASED) AND CHECK YOUR SUSPENSION PARTS
People who own dirt bikes are already familiar with the habit of greasing wheel bearings, since dirt bikes need a lot of grease virtually from the minute they’ve been purchased. Street bikes don’t have as many exposed bearings as dirt bikes do, but they do need a healthy dose of grease in areas like suspension linkages. Checking them and following regular greasing routines will make these exposed parts last longer.
Any good maintenance routine should involve checking the health of important bearings for signs of wear. It’s essential to do this because these bearings wear out quickly when they start to go. Steering stem bearings should be checked (raise the front wheels off the ground on a stand and check the feel of the turn). Any unusual feeling or excessive loose play during this check could be a sign that these bearings need to be replaced.
Check your bike’s swing arm. The pivot point should be tight and it should not have any side-to-side play in it. Same thing for the front and rear axles. Any play in these areas necessitates replacing of these bearings.
In summary, check all your bolts and bearings regularly. Grease them regularly to make them last longer, and put anti-seize coating on them when you reinstall your bolts (swing arm, linkage, motor mount). Paying attention to these critical parts will prevent bigger issues at a later time.